Abstract

    Open Access Research Article Article ID: JDPS-6-168

    Effect of the additive dentine conditioning in all-in-one adhesives on the bonding strength at simulated intrapulpal pressure

    Gerhardt T, Hasselmann S, Humpich T, Fielmann N, Giraki M, Rüttermann S and Gerhardt-Szép S*

    The aim of the study was to investigate the infl uence of additive etching of dentine with phosphoric acid on the shear bond strength of two different, self-conditioning, all-in-one adhesives [Adect (ADE), and One-Up-Bond F (OUP)]. Dentine discs from 90 human molars (n = 15 per group) were exposed to penetration by Ringer's solution (60 cm height, 22 °C) by means of a perfusion device. A two-step, self-conditioning adhesive system [Clearfi l SE (CSE)] was used as the control group. The dentine was either treated (+) after preliminary additive etching wssith 36% phosphoric acid for 20 seconds or left untreated (-). Subsequently, the samples were provided with a composite cylinder (Herculite XRV). After thermocycling (5/55 °C, 5000 cycles, 20 s holding time, 4 s transportation time), the shear bond strength (MPa) was determined with a Zwick universal testing machine (feed rate 5 mm/min). Furthermore, parametric Weibull regression models were applied to evaluate whether there was a signifi cant association between shear bond strength and the method of surface conditioning. Weibull analysis was performed using R software (version 2.11.1, R Foundation for Statistical Computing, Vienna, Austria). Differences between groups were tested using Wald tests, and p-values below 0.05 were considered signifi cant.

    Keywords:

    Published on: Jul 5, 2019 Pages: 21-27

    Full Text PDF Full Text HTML DOI: 10.17352/2394-8418.000068
    Get Citation Base Search Scilit OAI-PMH ResearchGate GrowKudos CrossMark

    Global Views

    Case Reports

    Peertechz Tweets

    Pinterest on JDPS